Shop Now

Isotherm Replacement DC Electronic Control Module for all Danfoss BD35 and BD50 Compressor’s – 101N0212 – 381840 SEG00002DA – 101N0219R (Eva Comp-Mod-Seacop)

Original price was: $508.00.Current price is: $395.00.

In stock (can be backordered)

In stock (can be backordered)

New Model 101N0219R Isotherm Replacement Isotherm DC Electronic Module for all Danfoss / Seacop BD35 and BD50 Compressor's
SKU: SEG00002DA Categories: , ,
Sale!
Isotherm Replacement DC Electronic Control Module for all Danfoss BD35 and BD50 Compressor's - 101N0212 - 381840 SEG00002DA - 101N0219R (Eva Comp-Mod-Seacop)

Isotherm Replacement DC Electronic Control Unit

* New Model 101N0219R Replacement For The 101N0212 & 101N0210 *

We deliver Australia wide – Ask us for a quote!!

12 – 24 Volt Electronic Module for all Danfoss BD35 and BD50 Compressors, used on Isotherm Refrigeration since 1998. Connects to the compressor with three pins.

Tech Tip: To test this module, put a jumper between the T (Thermostat) and C (Compressor) terminals. The compressor should start and run at low speed. If the compressor doesn’t start, you may need to replace this module.

 New Danfoss/ Seacop part number #101N0219 – Replacement for SECOP / Danfoss 101N0210 & 101N0212

Image of SECOP Replacement Module

  • Danfoss part number #101N0219
  • Replaces part number # 101N0212
  • Replaces part number # 101N0210
  • Case size: 2 5/8″ x 4 1/8″ x 1 3/4
  • The electronic unit is a dual voltage device. This means that the same unit can be used in both 12V and 24V power supply systems. Maximum voltage is 17V for a 12V system and 31.5V for a 24V power supply system. Max. ambient temperature is 55°C. The electronic unit has a built in thermal protection which is actuated and stops compressor operation if the electronic unit temperature gets too high.

Additional information

Weight 0.3 kg
Dimensions 15 × 10 × 6 cm

Related products