MUIR Anchor Chain 10mm Galvanised G50 Grade ‘L’ – AS2321 (F811137)
Galvanised Short Link Chain
This calibrated chain is manufactured from mild steel, welded for high strength, and hot-dipped galvanized for minimal corrosion. It is available in various sizes, please check your gypsy size before ordering.
Technical and Commercial Evaluation – Luxury Vessel Anchor Chain
| Muir G80 | G43 | Requirement | |
| Critical Requirements | |||
| Materials Specification | G80 | G43 | L Grade AS2321 (G30) |
| Dimensional Spec | Australian “L” Grade per AS2321 | Australian “L” Grade per AS2321 | Australian “L” Grade per AS2321 |
| Finish | Hot Dip Galvanised | Hot Dip Galvanised | Hot Dip Galvanised |
| Gypsy, Chain Lock, and Devils Claw Fitment Check | Yes | Unknown | Yes |
| Warranted for use on Muir Equipment | Yes | No | Yes |
| Max Breaking Loads | |||
| Factory | kN (Tested at Factory) | kN (Claimed on Website) | kN |
| 8mm | 58 | 52 | 31 |
| 10mm | 89 | 72 | 50 |
| 13mm | 156 | 122 | 84 |
| Tested (By Muir) | kN | kN | kN |
| 8mm | 64 | Unknown | NA |
| 10mm | 102 | Unknown | NA |
| 13mm | 150 | Unknown | NA |
| Test Location | Muir Production Facility | Unknown | NA |
| Test State of Chain | Hot Dip Galvanised | Unknown | NA |
| Note: | 1) Critically important that the chain MBL is tested after the application of Hot Dip Galvanising | ||
| 2) Many suppliers claim MBLs but this is before Hot Dip Galvanising which can change material properties | |||
| 3) Muir and its suppliers have tested Hot Dip Galvanised samples | |||
| Quality Documentation | |||
| ISO9001 Compliant | Yes | Unknown | NA |
| Class Society Workshop Approval | Yes (Lloyds, BV, DNV) | Unknown | NA |
| Class society inspection available | Yes if required, at a cost | Unknown | NA |
| Test Certificate Supplied | Yes (Material, Test, and dimensional) | Unknown | NA |
