Auto Anchor AA150 Universal Auto Anchor Winch Rode Counter
Panel Mount
AA150 Chain and Rode Counter Kit 12/24V
The Auto Anchor AA150 is a rope and chain or chain only rode counter. It does not control the windlass.
A toggle switch, deck switch or handheld remote is required to operate the windlass.
Panel mount rode counter for DC electric windlasses using all-chain or rope/chain rode.
Features:
- Easy to install with a large backlit LCD display.
- Counts in feet or metres and includes audible proximity warning for safe docking of your anchor.
- Suits rope and chain or chain only rodes.
- Auto Anchor is pre-calibrated to suit most Muir Windlass models for easy set up**.
- Panel mount rode counter
- Rode length monitoring from the helm.
- Docking alarm warns skipper when anchor is close to docking.
- Pre-programmed calibrations for rope/chain rodes.
- Install up to two units or combine with the AA550RC, AA500C or AA601 for multiple stations.
- Standard 60mm (2.36”) marine instrument console with large LCD display
**** NB: Requires Sensor Cable Pack ****
Includes:
- 1 Consol Unit
- 1 Sensor
- 1 Magnet
- Load Sensing Connectors
Options:
- AA9500 – 6.5 metre (21 ft) Sensor Cable Pack
- AA9501 – 10 metre (33 ft) Sensor Cable Pack
- AA9502 – 15 metre (49 ft) Sensor Cable Pack
- AA9503 – 20 metre (65 ft) Sensor Cable Pack
- AA9504 – 25 metre (75 ft) Sensor Cable Pack
- AA9516 – 30 metre (90 ft) Sensor Cable Pack
- AA9510 – Gender Adaptor (for joining 2x Sensor Cables)
- AA9507 – Field Connector Male
- AA9509 – Field Connector Female
- AA9506 – Adaptor F/F/M
