Hydrive Commander Complete Outboard Steering Kit – Front Mount Suits Most Single Outboards up to 200hp & Dual Counter Rotating Outboards up to 400HP (COMKIT5)

Sale!

Original price was: $1,731.00.Current price is: $1,458.00.

DIY Kit Includes: Front Mount 516FM cylinder, 501 Helm, 15 Mtrs 3/8” Nylon tubing & everything to complete the install

Complete Front Mount Commander Outboard Steering Kit (COMKIT5)

Suits Most Single Outboards to 200hp or Dual Outboards Counter-rotating Props up to 400HP

Front Mount 516FM Cylinder and 501N8 Helm Unit

Australian Made Quality Steering at an Affordable Price

The COMKIT5 features the front-mount style cylinder: Model 516FM and is suitable for leisure boats with single outboards up to 200HP or twin outboards up to 400HP TOTAL (counter-rotating).

This kit includes the front-mount style cylinder Model 516FM that is manufactured in high tensile aluminium for performance and protection with precision ground and polished 316 stainless steel piston rods for maximum service life.

The COMKIT5 is suitable for leisure boats with single outboards up to 200HP or twin outboards up to 400HP TOTAL (counter-rotating).

Is This the Right Kit for My Boat?

Advantages of the Front Mount steering kits installation is directly onto most V4 and V6 outboards and mounts to the front of the motor using 4 small bolts. Attaches to the outboard motor’s tiller arm using the motor’s existing drag-link.

Measure the narrowest section of your engine well – the Front Mount kits are all 540mm wide plus they need a little extra room for the engine to turn so ideally you’ll need Clearance (C) approx 740mm , as the cylinder tilts down with the motor you need to ensure this has room in front of the moto

r both Clearance (A) & Clearance (B) approx 120 – 150mm . Measure carefully, particularly with tapered wells

Kit Includes:  Each standard Commander Kit comes in a single carton including the following items:-

  • Model 501N8 helm
  • Model 516FM front-mount cylinder
  • 2 litres ULTRA-15 fluid
  • 15M (50ft) nylon hydraulic tubing
  • fittings
  • Bleeder kit
  • Instruction manual

Easy Installation:

These Hydrive Commander small-boat steering kits make it a very simple DIY installation.
Installation of HyDrive steering equipment is very simple. From the minute you open the box and begin to read the comprehensive instructions, you will find the system has been designed to be installed by even the most inexperienced boating enthusiast, without any hydraulic knowledge. Everything you need is included, right down to the nuts, bolts, and Loctite.

Other Kits Available: materials used to build them.  While other brands use anodised or painted aluminum cylinders, the HyDrive Admiral Series Kits use Chromed Brass, Bronze and Stainless steel materials – built for the toughest marine environment. The Admiral Kits also use a better quality 401 Helm Pump Unit.

Commander Kits  – Utilise an aluminium cylinder design, with unique electrolytic insulation between metals for maximum corrosion resistance. Commander kits use the 501 Helm Pump Unit.
Different VersionsSome Honda & Mercury Outboards –  may require a different version of this kit  to avoid interference with the motor cowl – these versions are also listed below.

  • COMKIT1 Hydrive Commander Outboard Steering Kit – Suits Most Single Outboards
  • COMKIT1-H Hydrive Commander Outboard Steering Kit – Suits Most Honda Outboards
  • COMKIT1-M Hydrive Commander Outboard Steering Kit – Suits Most Mercury Outboards
  • COMKIT1-SPORT Hydrive Commander Side Mount Steering Kit – Suits Most Outboards
  • COMKIT5 Hydrive Commander Front Mount Steering Kit – Suits Most Outboards
  • COMKIT6 Hydrive Commander Outboard Steering Kit – Suits up to 150Hp Outboards

Admiral Kits Admiral Kits suit single outboards to 300hp or twins to 600hp. Admiral Kits are for Commercial or Recreational Use.
What sets the HyDrive Admiral Series cylinders apart from the competition is the materials used to build them.  While other brands use anodised or painted aluminum cylinders, the HyDrive Admiral Series Kits use Chromed Brass, Bronze and Stainless steel materials – built for the toughest marine environment. The Admiral Kits also use a better quality 401 Helm Pump Unit.

  • OBKIT1 Hydrive Admiral Outboard Steering Kit – Suits Most Single Outboards
  • OBKIT1-HONDA Hydrive Admiral Outboard Steering Kit – Suits Most Honda Outboards
  • OBKIT1-MERC Hydrive Admiral Outboard Steering Kit – Suits Most Mercury Outboards
  • OBKIT-1-DCFL8 Hydrive Admiral Twin Outboard Steering Kit – Suits Most Outboards

Options:

  • Optional Helm Wedge – (WEDGE-401) – 20 Degree Wedge to Suit the 401 or 501 Helm Pumps – allows 0-20 degree adjustment to cater for an angled dash.

Hydrive Helm Wedge

  • Optional Rear Mount (Helm) Kit – Adding his unit means the steering wheel/helm does not protrude into the helmsman’s space so much as part of the helm mechanism can be recessed behind the dash. It  fits any model 401,402 and 501 helm unit – adjustable from low-profile to full protrusion for maximum flexibility in helm placement. Simply trim the spacers and studs to adjust the amount of penetration into the helm position. The front dash or console ring is fully O-ring sealed against pump body to prevent water ingress to the rear of the console. Easy to fit – easy to adjust – looks great. (REAR MOUNT KIT)

Hydrive Rear  Mount Kit

Weight 12 kg
Dimensions 68 × 30 × 20 cm